Welcome To Twentsche (Nanjing) Fibre Optics Ltd. (for short: TFO)!

Products

TFO Mini (G.657.A1 200μm)

Based on the optimum coated layer design, TFO MiniTM LightBend optical fibre keeps the cladding diameter unchanged but with coated diameter dramatical reduction. This product still retains the same and outstanding properties as ITU-T G.657.A1 and IEC 60793-2-50 type B6.a1 fibre with traditional coated diameter 245μm. And with zero water peak, low attenuation and excellent uniformity, low chromatic dispersion and PMD, excellent macrobending loss at minimum radius 10mm, superior and stable geometrical size control level, this full spectrum fibre is applicable to transmission system operating over the entire wavelength from 1260nm to 1625nm.

 

TFO MiniTM LightBend optical fibre supports higher density and smaller diameter cables which can improve duct utilization and save resource, widely used in the applications of FTTH, high count fibre cable, microcables. etc.

TFO MiniTM (G.657.A1 200μm)

Characteristics

Conditions

Parameters

Unit

Optical properties

Attenuation Coefficient

1310 nm

0.34

dB/km

1285-1330 nm

0.37

dB/km

1383 nmafter hydrogen aging

0.31

dB/km

1490 nm

0.23

dB/km

1550 nm

0.20

dB/km

1525 - 1575 nm

0.21

dB/km

1625 nm

0.22

dB/km

Mode Field Diameter(MFD)

1310 nm

9.0 ± 0.3

μm

1550 nm

10.2 ± 0.4

μm

Cut-Off Wavelength

Cable Cut-Off

1260

nm

Chromatic Dispersion

Zero Dispersion Wavelength

1300 - 1324

nm

Zero Dispersion Slope

0.090

ps/nm2/km

Dispersion Coefficient

1285 - 1339 nm

|3|

ps/nm/km

1550 nm

17

ps/nm/km

1625 nm

21

ps/nm/km

Polarisation Mode Dispersion

PMD Coefficient

Uncabled  fibre

0.10

ps/√km

PMD link design value

0.06

ps/√km

Point Discontinuity

1310 nm

0.05

dB

1550 nm

0.05

dB

Effective Group Refractive Index

1310 nm

1.4671

1550 nm

1.4675

1625 nm

1.4680

Geometrical Properties

Core Non-circularity

6

%

Cladding Diameter

125.0 ± 0.5

μm

Core/Cladding Concentricity Error

0.4

μm

Cladding Non-Circularity

0.6

%

Coating Diameter

190 ± 5

μm

Coating/Cladding Concentricity Error

8

μm

Mechanical properties

Proof Test

Fibre strain

1

%

Fibre load

9

N

Stress

100

kpsi

Dynamic Stress Corrosion Susceptibility Factor nd

Unaged

20

Aged30 days @ 85, 85% R.H.

20

Macro Bending Sensitivity

10 turns of 15 mm radius, 1550nm

0.25

dB

10 turns of 15 mm radius, 1625 nm

1.0

dB

1 turns of 10 mm radius, 1550 nm

0.75

dB

1 turns of 10 mm radius, 1625 nm

1.5

dB

Coating Strip Force

Peak value

1.3 - 8.9

N

Fibre Curl

4

m

Environmental Properties

Accelerated Ageing30days @ 85 85% R.H.

Induced attenuation1310 and 1550 nm

0.05

dB/km

Dry heat aging30days @ 85

Induced attenuation1310 and 1550 nm

0.05

dB/km

Temperature Cycling -60- +85

Induced attenuation1310 and 1550 nm

0.05

dB/km

Water Soak30 days @ 23

Induced attenuation1310 and 1550 nm

0.05

dB/km

Twentsche (Nanjing) Fibre Optics Ltd. 蘇ICP備11030802號(hào)-1